STARPLUS Triad XTS User Manual page 60

Conference
1. Lift handset to re-enter a monitored conference.
2. To re-enter a conference placed on hold, repeat steps for
establishing a conference.
3. To re-enter an unsupervised conference, lift handset and
press flashing CONF button. The CONF button lights steady
and a confirmation tone sounds.
To terminate a Conference, the conference initiator who is
actively in the conference must:
Replace handset or push ON/OFF button to OFF.
To terminate an Unsupervised Conference:
Press the flashing CONF button while on-hook, all parties
are dropped.
To terminate a party from a Conference (while in
conference):
1. Press line button of party to drop.
2. Replace handset or press ON/OFF button.
3. Lift handset or press ON/OFF button.
4. Press flashing CONF button.
SINGLE LINE TELEPHONE
To set up a Conference with one external and one other
internal station:
1. Make outside call.
2. Briefly depress and release the hookswitch to put the call
on hold.
3. Dial number of internal station you wish to add.
4. When that station answers, briefly depress and release
hookswitch again. All three parties will be connected.
49