Pbx/Centrex Transfer; Screened Transfer - STARPLUS Triad XTS User Manual

Call Transfer

PBX/CENTREX Transfer

While connected to an outside line (PBX/Centrex):
1. Press FLASH. Transfer dial tone is heard.
2. Dial PBX/Centrex station number.
3. Hang up to complete the transfer.
SINGLE LINE TELEPHONE
To make a PBX/Centrex Transfer:
1. Briefly depress and release the hookswitch. Intercom dial
tone sounds.
2. Dial [660]. A Flash command is presented to the PBX or
Centrex CO Line (stutter tone sounds).
3. Dial desired telephone number.
4. Replace handset to complete transfer.

Screened Transfer

To conduct the transfer, while connected to an outside line:
1. Press the station button where call is to be transferred (if
programmed on your telephone) or press TRANS and dial
station number.
The called extension signals according to the intercom
signal switch position.
2. When that extension answers, announce the transfer.
3. Hang up to complete transfer.
39