Call Forward - STARPLUS Triad XTS User Manual

30

Call Forward

The Call Forward feature allows a station the ability to have
calls (internal or external) forwarded to a designated station, an
ACD or UCD group pilot number, Voice Mail group number, or
Hunt group. This feature must be enabled in admin
programming.
To activate Call Forwarding:
1. Lift handset or press ON/OFF button.
2. Press the FWD button or dial [640].
3. Dial the appropriate forwarding condition code.
[6] = All Calls
[7] = No Answer
4. Press DSS button of desired station,
-or-
Dial the desired extension number where to forward calls,
including ACD or UCD, Voice Mail, Hunt Group pilot
numbers and Speed Dial bins for off-net forwarding.
5. Replace handset or press ON/OFF button.
To remove Call Forwarding:
1. Lift handset or press ON/OFF button.
2. Press the FWD button or dial either [640] or [662]. A
confirmation tone sounds and the FWD LED extinguishes.
SINGLE LINE TELEPHONE
The SLT operation uses the same procedures as used in
Digital Telephone operation described above, except there is
no FWD button. You must use feature codes 640 and 662.
[8] = Busy
[9] = Busy/No Answer
Call Forward