Table of Contents
Advertisement
Attendant Features
Speaker Mode
The VM message is broadcast over the speaker. The MUTE key
is enabled and the LED lights solid red. When the station is
monitoring the caller in VM, the display shows.
Mailbox owner options when a call is sent to voice mailbox:
To leave caller in VM and turn off speaker, press ON/
OFF and continue to listen to message being left
without taking action at the keyset. After VM message
is left, preprogrammed button returns solid red and
keyset returns to idle.
-or-
To talk to party leaving the message, press MUTE key.
Station is still in CONF and caller can hear VM and you.
-or-
To pick up call, press the flexible button. When call is
picked up, voice mail system disconnects from the call.
Attendant Features
If your station is designated as the attendant station, the
following features are available to assist you in efficiently
operating your telephone.
911 Attendant Alert
When enabled, and a flexible button has been programmed
(programming code = 608), the 911 Alert feature effects a
flashing flexible button and audible tone to notify the
Attendant of a 911 call in progress.
VM SCREENING
MMM DD Y Y
❑
Flex
Btn
HH:MM am
15
Advertisement
Table of Contents
