Call Park - System - STARPLUS Triad XTS User Manual

Call Park
To retrieve a Station Park Call:
Dial [# 6] + user's station number, while at the user's
telephone or from any telephone in the system.
-or-
Dial [438] from the user's station.
SINGLE LINE TELEPHONE
The SLT operation uses the same procedures as used in
Digital Telephone operation described above, except there is
no TRANS button. The user must use 438 and hookflash 439
feature codes.

Call Park - System

An outside line can be placed into one of eight parking
locations and can be retrieved by any station that has a direct
line appearance or an available Loop button. Parked calls have
their own recall timer that recalls the originating station, and if
still unanswered, the Attendant(s). An outside line may also be
placed into a station park location. The station user then dials a
code followed by their station number to retrieve the call.
To consult, page, or call an internal party while connected
to an outside line:
1. Press TRANS button or press the CALL PARK flexible button.
The caller is put on hold.
2. Dial parking location (430 to 437) or press the
preprogrammed CALL PARK flexible button. A confirmation
tone sounds.
3. If busy tone is received, press TRANS twice and dial another
park location or press the CALL PARK flexible button for a
different parking location.
35