Answering An Intercom Call; Intercom Transfer - STARPLUS Triad XTS User Manual

60

Answering an Intercom Call

When your intercom button signal switch is in the:
H Mode (No LED) Handsfree Mode -- You hear three
bursts of tone and an announcement. Reply handsfree
or lift handset for privacy.
P Mode (LED Flashing) Privacy Mode -- You hear three
bursts of tone and a one-way announcement. The
calling party cannot hear conversations in progress.
Lift handset or press ON/OFF to answer.
-or-
Position the H-T-P switch to the H mode to answer.
T Mode (LED On) Tone Mode -- You hear repeated
bursts of intercom tone ringing and HOLD button slow
flashes.
Lift handset or press ON/OFF to answer.
-or-
Position the H-T-P switch to the H mode to answer.

Intercom Transfer

To use Intercom Transfer without DSS Buttons:
1. Receive or make an intercom call.
2. Press the TRANS button. Intercom dial tone sounds.
3. Dial the station.
4. When the second station answers, you are in a supervised
transfer mode (first station is staged for transfer).
5. Hang up (stations 1 and 2 are connected).
Use feature code 667 to select an H, P, or T
mode for 8-button digital telephones. Each
use of this feature code acts as a rotary
through the three options.
Intercom