Table of Contents
Advertisement
20
The first entry (000) in the Directory List is shown on the
display.
The following procedure is used to enter, edit, and erase names
in the Directory List for stations or speed dial numbers.
1. Enter desired 3-digit Directory List number (000-199), or
dial [ ] to scroll up (next entry) or [#] to scroll down
(previous entry) through the list.
If just changing a name associated with an existing station,
skip to step 4.
2. Press TRANS.
3. Enter the 3- or 4-digit station intercom number.
4. Press MUTE.
DIR LST AAA
nnnnnnnnnnnnnnnnnnnnnnn
AAA = Directory List entry number (000-199)
XXXX = Either:,
A 3- or 4-digit station number (100-8999)
-or-
A 3-digit local number/name translation table number
(600-799 minus assigned station numbers that would
overlap)
-or-
A 4-digit remote device number (1000-8999 minus
assigned station numbers that would overlap)
-or-
A 4-digit station speed bin number (9020-9999)
nnn = Programmed Name (blank if none)
Attendant Features
BIN/ICM: XXXX
Advertisement
Table of Contents
