STARPLUS Triad XTS User Manual page 40

Call Coverage
2. The Coverage station user then presses their flashing
COVERAGE flexible button,
-or-
Presses the ON/OFF button.
The call is answered and ceases to ring at any other stations
that may have the same coverage appearance. One of the
following messages display after the call is answered.
Non-network system or in same Node:
Network system with call passed across a switch:
SINGLE LINE TELEPHONE
This feature can cover SLT extensions, however an SLT cannot
perform the call coverage function. The SLT extension need
not be physically installed, only the SLT card must be
installed.
C AL L FOR STA XXXX
FR OM S TA Y Y Y Y
XXXXXXXXX C ALL ING
Y Y Y Y Y Y
XXXXXXXXX = Name of calling party
YYYYYY = Specific CO Line type being used (e.g., PRI #23)
HH:MM:SS = Amount of time on the call
HH:MM:SS
HH:MM:SS
29