Creating A Patch; Creating A Patch Intuitively (Sound Shaper) - Roland V-Synth XT Owner's Manual

Creating a Patch

This chapter explains the steps for creating a patch on the V-Synth XT. Broadly
speaking, there are two ways to create a patch.
Using a template to create a patch intuitively
(the Sound Shaper function)
You can easily create a patch just by choosing a group and template.
Refer to "Creating a patch intuitively (Sound Shaper) "(p. 40).
Creating a patch from scratch
This section explains the basic procedure for creating a patch on the V-Synth XT.
Refer to "Initializing Patch Settings "(p. 42).

Creating a patch intuitively (Sound Shaper)

The "Sound Shaper" function lets you create a patch simply by choosing a group and
template, and operating knobs and buttons to edit the relevant aspects of the sound,
just like a professional sound designer.
1
Make sure that the PATCH PLAY screen is displayed.
2
At the upper right of the screen, touch <▼ MENU >.
A pulldown menu will appear.
3
In the pulldown menu, touch < Sound Shaper >.
The following window will appear.
Choose the "Group" and "Template" that are closest to the sound you want to create.
Use the list at the left to choose a group, and use the list at the right to choose a
template. Then touch < Enter >.
40