Switching Each Section On/Off
After deciding on the structure type to use, you can switch each section within that
structure on or off as desired.
1
Touch <Exit>. Make sure that the PATCH PLAY screen is displayed.
2
While holding down the [SHIFT] button on the front panel, touch the
relevant sections in the PATCH PLAY screen to turn individual
sections on or off as needed.
Section names shown in white characters are on, and those displayed in gray
characters are off.
fig.Q-26
On
Off
For example if "OSC1" and "OSC2" are both off, there will be no sound-producing
section, and no sound will be output.
Creating a Patch
45