Roland V-Synth XT Owner's Manual page 20

2
You can change the angle of the V-Synth XT while it is mounted in a
rack.
Make sure that the V-Synth XT is securely installed in your rack. Then
firmly grasp both of the front panel handles, and pivot it toward
yourself until you hear a click.
To return the unit to its normal angle, push the handles inward until
you hear the click.
* You must perform this operation with the V-Synth XT installed in a rack.
* Some space above the V-Synth XT is required in order to use this rotating capability.
If equipment is installed in your rack directly above the V-Synth XT, you won't be able to
perform this operation.
Installing the rotation-lock hardware
Before you transport the V-Synth XT, you must install the included "rotation lock
hardware." The unit may be damaged if you transport it without the "rotation lock
hardware" installed.
Use screws to fasten the "rotation lock hardware" as shown in the following
illustration.
POWER
Getting Ready
19