Roland V-Synth XT Owner's Manual page 126

MIDI/USB
fig.05-03_50
Device ID (Device ID Number)
When you want to transmit or receive System Exclusive messages,
set this parameter to match the Device ID number of the other MIDI
device.
Value: 17–32
Clock Source
The LFO cycle or multi-effects changes can be synchronized to a
clock (tempo). When this is used by the patch, this Clock Source
setting determines the clock which will be used.
Value
INTERNAL: The Patch Tempo will be used.
EXTERNAL: Synchronize to the clock of an external sequencer.
Rx PC (Receive Program Change Switch)
Specifies whether Program Change messages will be received (ON)
or not (OFF).
Value: OFF, ON
Rx Bank (Receive Bank Select Switch)
Specifies whether Bank Select messages will be received (ON) or not
(OFF).
Value: OFF, ON
Rx Sys-Ex (Receive System Exclusive Switch)
Specifies whether System Exclusive messages will be received (ON)
or not (OFF).
Value: OFF, ON
Tx Edit (Transmit Edit Data Switch)
Specify whether changes you make in the settings of a patch will be
transmitted as system exclusive messages (ON), or will not be
transmitted (OFF).
Value: OFF, ON
Clock Out
Specifies whether MIDI clock will be transmitted (ON) or not (OFF).
Value: OFF, ON
Settings Common to All Modes (System Mode)
USB-MIDI Thru Sw (USB-MIDI Thru Switch)
This switch specifies whether MIDI messages received at the MIDI
connector will be re-transmitted from the MIDI OUT connector (ON)
or not (OFF).
Value: OFF, ON
fig.05-03b.e
MIDI OUT
Controller Section
USB-MIDI Thru Sw=OFF
MIDI OUT
Controller Section
USB-MIDI Thru Sw=ON
MIDI IN USB OUT
Sound
Generator
Section
Local Switch
V-Synth XT
MIDI IN USB OUT
Sound
Generator
Section
Local Switch
V-Synth XT
USB IN
USB IN
125