Editing A Value - Roland V-Synth XT Owner's Manual

Basic Touch Screen Operation

Editing a Value

To edit a value, you can use the VALUE dial, [INC] [DEC], or drag on the touch
screen.
• In each V-Synth XT screen, you can select a value using the cursor as described
earlier, and modify its value.
• Each parameter has its own range of possible values. You cannot set any value
smaller than the minimum value or greater than the maximum value.
VALUE Dial
Turning the VALUE dial clockwise increases the value, and turning it
counterclockwise decreases its value. Hold down [SHIFT] as you move the VALUE
dial to increase value increments to make large value changes more quickly.
fig.01-10
[INC] and [DEC]
Press [INC] to increase the selected value, and [DEC] to decrease it. Keep the button
pressed for continuous adjustment. For faster value increases, keep [INC] pressed
down and press [DEC]. To decrease values quickly, keep [DEC] pressed down and
press [INC].
fig.01-11
Touch Screen
Touch a parameter value, and drag your finger up/down or left/right. Dragging
upward or to the right increases the value, and dragging downward or to the left
decreases the value.
fig.01-12
26