29: Od/Ds -> Delay (Overdrive/Distortion -> Delay); 30: Cho/Flg -> Delay (Chorus/Flanger -> Delay) - Roland V-Synth XT Owner's Manual

29: OD/DS −> Delay
(Overdrive/Distortion −> Delay)
This effect connects either Overdrive or Distortion and Delay in series.
fig.MFX-29
L
Overdrive/
Delay
Distortion
R
Parameter Value
Drive Mode OD, DS
Drive #1 0–127
Amp Sim Sw OFF, ON
Amp Type SMALL,
BUILT-IN, 2-
STACK, 3-
STACK
Distortion Level 0–127
Delay Time 0–1300 ms, note Adjusts the delay time from the
Delay Feedback -98– +98%
#2
Low Damp Freq 50–4000 Hz
Low Damp -36–0 dB
Gain
Hi Damp Freq 2000–20000 Hz
Hi Damp Gain -36–0 dB
Delay Level 0–127
Ps Low Freq 50–4000 Hz
Ps Low Gain -15– +15 dB
Ps Hi Freq 2000–20000 Hz
Ps Hi Gain -15– +15 dB
2-Band
EQ
Description
Selects whether to use overdrive
(OD) or distortion (DS).
Degree of distortion
Turns the amp simulator on/off.
Type of guitar amp
SMALL: small amp
BUILT-IN: single-unit type amp
2-STACK: large double stack
amp
3-STACK: large triple stack amp
Volume of the overdrive or dis-
tortion sound.
direct sound until the delay
sound is heard.
Adjusts the proportion of the de-
lay sound that is fed back into
the effect. Negative (-) settings
will invert the phase.
Adjusts the frequency below
which sound fed back to the ef-
fect will be cut.
The Low Damp function damps
the low frequency band of the
delay sound quicker than other
bands, which makes for a clearer
delay effect.
Degree of Low Damp
Adjusts the frequency above
which sound fed back to the ef-
fect will be cut.
High Damp, by attenuating the
higher frequencies first, makes
the delay sound more natural.
Degree of High Damp
Volume of the delay sound.
Frequency of the low range
Gain of the low range
Frequency of the high range
Gain of the high range
30: Cho/Flg −> Delay
(Chorus/Flanger −> Delay)
This effect connects either Chorus or Flanger and Delay in series.
fig.MFX-30
L
Chorus/
Delay
Flanger
R
Parameter Value
Mod Mode CHORUS,
(Chorus / FLANGER
Flanger)
Mod Rate #1 0.05–10.0 Hz,
note
Mod Depth 0–127
Mod Phase 0–180 deg
Mod Pre Delay 0–50.0 ms
Mod Feedback -98– +98%
Xover LowFreq 50–4000 Hz
Xover Low Gain -36–0 dB
Xover HiFreq 2000–20000 Hz
Xover Hi Gain -36–0 dB
Mod Level 0–127
Delay Time 0–1300 ms, note Adjusts the delay time from the
Delay Feedback -98– +98%
Low Damp Freq 50–4000 Hz
Low Damp Gain -36–0 dB
Hi Damp Freq 2000–20000 Hz
Hi Damp Gain -36–0 dB
Delay Level 0–127
Ps Low Freq 50–4000 Hz
Ps Low Gain -15– +15 dB
Ps Hi Freq 2000–20000 Hz
Ps Hi Gain -15– +15 dB
Effects List
2-Band
EQ
Description
Selects whether to use chorus or
flanger.
Adjusts the speed of modulation
for the chorus or flanger.
Adjusts the depth of modulation
for the chorus or flanger.
Sets how the chorus or flanger
sound is spread.
Adjusts the delay time from the
direct sound until the chorus or
flanger sound is heard.
Adjusts the proportion of the ef-
fect sound that is fed back into
the effect. Negative (-) settings
will invert the phase.
Attenuates the effect in the range
below the specified frequency.
Specifies how greatly the low
range will be attenuated.
Attenuates the effect in the range
above the specified frequency.
Specifies how greatly the high
range will be attenuated.
Volume of the chorus or flanger
sound.
direct sound until the delay
sound is heard.
Adjusts the proportion of the de-
lay sound that is fed back into
the effect. Negative (-) settings
will invert the phase.
Adjusts the frequency below
which sound fed back to the ef-
fect will be cut.
The Low Damp function damps
the low frequency band of the
delay sound quicker than other
bands, which makes for a clearer
delay effect.
Degree of Low Damp
Adjusts the frequency above
which sound fed back to the ef-
fect will be cut.
High Damp, by attenuating the
higher frequencies first, makes
the delay sound more natural.
Degree of High Damp
Volume of the delay sound.
Frequency of the low range
Gain of the low range
Frequency of the high range
Gain of the high range
179