Selecting Patches From The List - Roland V-Synth XT Owner's Manual

Playing in Patch Mode
3. Touch the desired category, and select a patch from the list.
You can move to a different page within the same category by
touching a page navigation button in the bottom of the screen.
Category
SYNTH Synth
LEAD Lead
PAD/STING Pad/Strings
VOX/CHOIR Vox/Choir
PIANO/KBD Piano/Keyboards
BASS/GUITAR Bass/Guitar
WINDS Winds
BELL/ Bell/Mallet/Hit
MALLET
MELO SEQ Melodic Sequence
RHY SEQ Rhythmic Sequence Rhythmic (i.e., non-
ARPEG Arpeggio
FX/AMBI FX/Noise/
Ambient
ETHNIC Ethnic
DRUM/PERC Drum/Percussion
COMBI/ Combination/
OTHERS Others
NO ASSIGN No Assign
"Assigning the Category of a Patch" (p. 74)
62
Contents
Synth
Lead
Pad/Strings
Voice/Choir
Piano/Keyboards
Bass/Guitar
Winds
Bell/Mallet/Hit
Melodic (i.e., pitched)
sequences
pitched) sequences
Arpeggio
Effect/Noise/
Ambient
Ethnic
Drum/Percussion
Combinations using
zones/other
No Assign

Selecting Patches from the List

You can display a list of patches and select a patch from that list.
1. Access the PATCH PLAY screen (p. 60).
2. Touch <List> in the upper left area of the display.
The PATCH List window appears.
fig.02-04_50
3. Select a patch from the list.
Either turn the VALUE dial or use [INC][DEC] to select a patch.
You can also select a patch by touching it on the display.
If you select a patch in the list and play the external MIDI
keyboard, the selected patch will sound. This is a useful way to
audition the sound of a patch.
4. To view other patches, touch <017-032>–<241-256>, located
at either side of the screen. To view higher-numbered
patches, touch <257-512>, located at the bottom of the
screen.
5. Touch <OK>.
The patch is selected and the PATCH List window closes.