Message List; Error Screens - Roland V-Synth XT Owner's Manual

Message List

The V-Synth XT displays a variety of messages. There are three types of message screen.
ERROR screen: This will appear if you attempt to perform an incorrect operation, or if an operation could not be executed correctly.
This will appear when caution is necessary.
WARNING screen:
Message box: This informs you of the current status. It will also appear if you attempt to perform an incorrect operation, or if an
operation could not be executed correctly.
Messages are listed here alphabetically for each type of message screen.

ERROR Screens

If an ERROR screen appears, touch <ACCEPT> to erase the message.
Message
DISK
Disk Full!
DISK
File/Folder Name Duplicate!
DISK
File Not Found!
DISK
File Read Error!
DISK
File Write Error!
DISK
Illegal Format!
DISK
Illegal PCM Wave!
Cannot Load This Wave.
DISK
Memory Full!
DISK
Path Duplicate!
DISK
Path Name Too Long!
DISK
PC Card Not Ready!
DISK
Too Many Channels!
Cannot Load This Wave.
DISK
Unformatted Disk!
DISK
Unknown Disk Error!
DISK
You Cannot Use This Device!
ENCODE
Encoding Error!
ENCODE
Memory Full!
IMPORT
No Room for Patches!
IMPORT
No Room for Samples!
SAMPLE EDIT
Copy Buffer Not Allocated!
Meaning
The media is full, and no further writing is possible. Delete unneeded files from the media (p. 136). Al-
There is an identically named file or folder.
A patch or sample used by the project or patch was
not found on disk.
The data is damaged, and cannot be loaded.
The media is of a format to which the V-Synth XT
cannot write.
Since the format of this file is incorrect, it cannot be
loaded.
This file uses a type of compression that the V-
Synth XT is unable to read.
Since the wave memory has become full, the opera-
tion was halted.
You are attempting to write to the same hierarchical
level.
The path name is too long.
The memory card is not ready.
This file contains waves for three or more channels,
and cannot be loaded into the V-Synth XT.
This disk cannot be used by the V-Synth XT.
A disk error of unknown causes has occurred.
The operation you attempted to execute does not
support this media.
For some reason, encoding is not possible.
Due to insufficient wave memory, encoding is not
possible.
There are no vacant patches.
There are no vacant samples.
There is not enough wave memory to execute the
Copy.
Action
ternatively, provide other media that has free space.
Assign a different name (p. 137). Alternatively,
please write to a folder that does not contain an
identically-named file or folder.
Re-create the project or patch, and save it.
Do not use this file.
Prepare a media that is of a format to which the V-
Synth XT is able to write.
Do not use this file.
Use the device that created the file to convert the
data into an 8 bit or 16 bit wave.
Delete unneeded samples from the V-Synth XT. Al-
ternatively, individually import the patches or sam-
ples that you want to use.
Change the writing destination.
Shorten the names of each folder (p. 137). Alterna-
tively, move the entire folder to a shallower level of
the hierarchy (p. 135).
* The "path" indicates the hierarchical level at
which the file is located. It is given together with the
folder name.
Insert another memory card.
Do not use this file.
Format the disk on the V-Synth XT.
Contact your dealer or a nearby Roland service cen-
ter for service.
Do not select this media for this operation.
Change the encoding type and try again.
Shorten the wave (p. 115), or delete unwanted sam-
ples from the V-Synth XT's memory (p. 109).
Delete unneeded patches from the V-Synth XT (p.
77).
Delete unneeded samples from the V-Synth XT (p.
109).
Shorten the range that will be copied (p. 115), or de-
lete unneeded samples from the V-Synth XT (p.
109).
197