Message Boxes - Roland V-Synth XT Owner's Manual

Message Boxes

Message boxes are displayed briefly, and then disappear automatically.
Message
Canceled!
Cannot Delete This Event!
Checksum Error!
Completed!
Connecting...
Disconnecting...
Event Doesn't Exist Here!
Event Interval Too Narrow!
Improper Name!
MIDI Buffer Full!
MIDI Communication Error!
MIDI Offline!
Please Wait a Minute.
Processing...
Transmitting...
Error Receiving Data!
USB Offline!
Writing...
Meaning
The operation is canceled.
The events at the beginning and end of a wave can-
not be deleted.
The received system exclusive message has an in-
correct checksum value.
The operation has been completed.
Now establishing a connection.
Now breaking the connection.
There is no event at the specified location.
The event interval is too narrow for events to be
placed in it.
The folder name or volume label is blank.
An excessive amount of MIDI data was received all
at once, and could not be processed properly.
A MIDI hardware error has occurred.
The MIDI IN connection has been broken.
Please wait a short time.
The operation is being executed.
The data is being transmitted.
MIDI message could not be received correctly.
USB cable is not connected.
Data is being written.
Message List
Action
Correct the checksum value.
Specify a location where there is an event.
Move the interval further from the nearest event.
Assign a name before you execute (p. 137).
If the same message appears repeatedly, please con-
tact your dealer or a nearby Roland service center
for service.
Check whether there is a problem with the MIDI ca-
ble connected to the V-Synth XT's MIDI IN, or
whether the MIDI cable has been disconnected.
If the same message appears repeatedly, there is a
problem with the content of the MIDI messages.
Check whether there is a problem with the USB ca-
ble connected to the V-Synth XT's USB connector,
or whether the USB cable has been disconnected.
199