Try Out The Sounds; Selecting Patches And Playing Sounds - Roland V-Synth XT Owner's Manual

Try Out the Sounds

Selecting Patches and Playing Sounds

The V-Synth XT comes with a wide range of onboard sounds, including single tones
called patches. Let's select a few patches to get an idea of the variety of sounds
available with the V-Synth XT.
1
Make sure the PATCH PLAY screen is displayed.
If the PATCH PLAY screen—shown below—is not displayed, press [EXIT] once or
twice until the PATCH PLAY screen appears.
fig.Q-06.e
Patch number
2
Press the [PREVIEW] button to audition the patch.
3
To change to a different patch, touch the patch number to highlight it,
and then turn the VALUE dial or press [INC] [DEC]. At this time you
can switch more rapidly by holding down [SHIFT] while you perform
these operations.
fig.Q-06a
28
You can also touch the patch
number display area and use
the numeric keys to switch
patches (p. 27).
Alternately, you can touch the
patch number and drag your
finger up and down—or right
and left—to change patches.