NEC Express 5800 User Manual page 76

4-34 Windows Setup
[Team #1: Adaptive Fault Tolerance Mode] is added to Network Component Tree.
4. Select [Stratus emb-82559 10/100 Enet Adapter] from Network Component Tree.
pop-up menu appears. Select [Team #1: Adaptive Fault Tolerance Mode] from [Add to
T am], and add the adapters. e
You will see the warning message when you add the team. You can ignore this warnin
me ssage by clicking [OK]. This warning message is to inform you that only one adapte
adde d to the team.
5. Select [Stratus emb-82559 10/100 Enet Adapter #2] from Network Component Tree in the
sam e manner as for 4. The pop-up menu appears. Select [Team #1: Adaptive Fault Toleran
Mode] from [Add to Team], and add the adapters.
IMP ORTANT:
6. Mak e settings of dual configuration for "Stratus emb-82544GC Copper Gigabit Adapter"
(1000Base) as well.
P erform 3 to 5 in the same mann
[Stratus emb-82544GC Copper Gigabit Adapter].
In 3, you can also select [Load Balancing]. In this case, [Team #X: Adaptive Load Balancing
Mode] will be adde
Do not set [Preferred Primary] or [Preferred Secondary] to each adapter
er, replacing [Stratus emb-82559 10/100 Enet Adapter] with
d.
The
g
r is
ce
.