NEC Express 5800 User Manual page 68

Hide thumbs Also See for Express 5800:
Table of Contents

Advertisement

4-26
Windows Setup
to NTFS and the file system will be converted automatically. There is no user intervention.
31. After the system is restarted, the setup screen will be displayed and the setup will proceed
automatically. There is no user intervention.
The following settings are made automatically:
[Collecting information] - [Dynamic Update] - [Preparing installation] - [Installing Windows] -
[Finalizing installation]
IMPORTANT:
appear, but user intervention is not required.
32. The system will be automatically rebooted. No user intervention is required.
IMPORTANT:
When rebooting, the message "Press any key to boot from CD..." will appear, but user
intervention is not required.
The selection of "Previous Operating System C:" may be displayed on the OS selection
screen. Do not select it. Selecting "Previous Operating System C:" will display black
screen and the process will be stopped. In such case, reboot the system by pressing Ctrl
+ Alt + Delete or switching the power to OFF/ ON. The installation is continued after
the system is rebooted.
33. After the system is rebooted, the following message will appear and the installation will be
continued. The system configuration is done automatically. User intervention is not required.
NEC Express5800/ft series clear installation
** Please do not perform any operations. **
** The system will restart automatically. **
Configuring System.
The system will automatically restart in approximately 2 minutes.
*** Setting [ft series environment] ***
*** Setting [ft series environment (NECHWID)] ***
*** Checking [disk space] ***
The system will automatically restart in approximately 10 seconds.
IMPORTANT:
terminated by closing the window, etc., the installation will be stopped. In such case,
operations on Windows will be possible, but each module or PCI board will not be
duplicated properly. If this happens, you need to start over ft series setup.
When restarting, the message "Press any key to boot from CD..." will
Never terminate the above program while it is running. If it is

Advertisement

Table of Contents
loading

Table of Contents