NEC Express 5800 User Manual page 64

4-22 Windows Setup
14. "Important 4" message will appear.
Read the message and follow the instructions.
*** Important 4
- Confirm that all PCI and CPU modules are inserted into the machine.
If there are any un-inserted PCI or CPU modules, please insert them
at this time. After the insertion of all of the modules,
press any key to continue installation.
Strike a key when ready . . .
15. "Important 5" message will appear.
Read the message and follow the instructions.
*** Important 5
- Confirm that no LAN cables are connected to the server at this
time.
If there are LAN cables connected to the server, remove them,
and press any key to continue the installation process.
Strike a key when ready . . .
16. <Only when the usage of the "NEC Express5800/ft series ft Update CD" is selected>
The message below will appear. Wait about 3 minutes until copying is completed.
Copying necessary NEC Express5800/ft series system software to the
system drive... Approximately 3 minutes.
Necessary NEC Express5800/ft series software has been copied.
IMPORTANT:
selected, the above message will not appear. Go on to 17.
17. When message requesting for Windows Server 2003 CD-ROM appears, follow the instruction
on the screen and insert the Windows Server 2003 Enterprise Edition CD-ROM into the
CD-ROM drive.
Insert the Windows Server 2003 CD-ROM
Strike a key when ready . . .
When the usage of the "NEC Express5800/ft series ft Update CD" is not