NEC Express 5800 User Manual page 66

4-24 Windows Setup
23. When the language selection message for Microsoft HotFix to install appears, enter a number
of language to install.
Install which version of the Microsoft HotFix?
1.English
2.Simplified Chinese
3.Traditional Chinese
4.Other
Enter a number [1,2,3,4]?
24. When the confirmation message for the selected language apperars, type [Y] if it is correct or
type [N] if it is wrong.
"XXX" is selected.
Are you sure [Y,N]?
25. When the completion of copying Microsoft HotFix, the following message will appear.
Follow the instruction on the screen, insert appropriate CD-ROM and press any key.
Microsoft HotFix will be copied to the Hard Disk.
- If you are using only the NEC EXPRESSBUILDER for ft series setup,
insert the NEC EXPRESSBUILDER to the CD-ROM drive,
and press any key to continue the installation process.
.
- If you are using the ft Update CD for ft series setup,
insert the ft Update CD to the CD-ROM drive,
and press any key to continue the installation process.
Strike a key when ready . . .
26. The following message will appear. Wait until copying process completes.
Copying necessary NEC Express5800/ft series system software to the
system drive... This may take a few moments.
27. When the following message appears, remove the CD from the CD-ROM drive and press any
key.
Remove CD-ROM from the CD-ROM drive.
Strike a key when ready . . .