NEC Express 5800 User Manual page 73

41. The following screen will appear. Follow the instruction in the screen and remove the CD from
the drive, and then press any key.
The NEC Express5800/ft series restarts automatically.
Insert NEC EXPRESSBUILDER CD-ROM into the CD-ROM drive.
Strike a key when ready . . .
*** Installing [ft control software license] ***
*** Setting [Server wizard on] ***
*** Setting [ft version information] ***
*****************************************************
NEC Express5800/ft series clear installation completed.
Be certain to set the BIOS [Boot Monitoring] setting
back to [Enabled] before starting operations.
For details, refer to the user's guide.
*****************************************************
The system will reboot to apply changes.
Please remove the CD-ROM from the CD-ROM drive.
Strike a key when ready . . .
IMPORTANT:
follow this User's Guide and enable boot monitoring in "Step 12: Enable Boot
Monitoring Function" (page 4-50).
42. After the machine is restarted, log on as a user with Administrator authority.
IMPORTANT:
during ft series Setup, apply Microsoft HotFix after logging on. For details about
applying Microsoft HotFix, see "Applying Microsoft HotFix" in the User's Guide
(Setup).
To change the setting of BIOS's "Boot Monitoring" to "Enabled",
When "update.exe – application error" occurs while applying HotFix
Windows Setup 4-31