NEC Express 5800 User Manual page 72

4-30 Windows Setup
38. After restarting, the [Welcome to the Windows Setup Wizard] screen will appear.
Click [Next>] and follow the instruction of the wizard. After completing operations in the
wizard, the NEC Express5800/ft series will be restarted automatically.
IMPORTANT:
Read [License Agreement] thoroughly.
If you agree, click [I accept this agreement.] and click [Next>].
If you do not agree, click [I don't accept this agreement.] and click [Next>].
If you do not agree, the setup will be terminated and Windows will not be installed.
The CPU module status LED 1 and PCI module status LED 1 illuminate red
during setup, but that does not indicate module error. Once each module is
successfully duplicated, the CPU module status LED 1 and PCI module status LED 1
are turned off, and the CPU module status LED 2 and PCI module status LED 2
illuminate green. For details of indications of each module LED, see "LEDs" of the
other volume of User's Guide.
39. After restarting, the following message appears and the NEC Express5800/ft series setup is
continued. Press any key to continue the process.
***********************************************************
NEC Express5800/ft series clear installation processing...
Please follow the instructions which appear on the screen.
***********************************************************
Strike a key when ready . . .
IMPORTANT:
The start menu of Windows appears to the front of the window.
Make the command prompt window on the back active and press any key to continue the
process.
40. The following message will appear. Follow the instruction in the screen and insert the NEC
EXPRESSBUILDER CD-ROM into the drive, and then press any key.
Insert the NEC EXPRESSBUILDER CD-ROM into CD-ROM drive.
Strike a key when ready . . .