NEC Express 5800 User Manual page 60

4-18 Windows Setup
4. Click [Setup].
5. When the following message appears, click [Confirm].
Note
We recommend you that you should save the information proper to your
system after system setup. If not, you will not be able to recover the
information. You can save the information by the following process.
(1) Select 'Tools'. (2) Select 'Off-line Maintenance Utility'.
(3) Select 'System Information Management.' (4) Select 'Save'.
6. When the following message appears, read it and press Enter.
This program will delete all existing files on the system drive,
and install Windows Server 2003.
After which required NEC Express5800/ft series software will be installed.
Note - BIOS "Boot Monitoring" configuration must be set to "Disabled"
Please refer to the User's Guide for details.
Note - This program will automatically reboot the system.
Leave the CD-ROM in the CD-ROM drive.
Warning - Be sure to back up all data on the system drive before proceeding.
Press "Enter" to continue or CTRL-C to abort and exit to DOS
The message below appears and the hard disk is initialized.
While this message is being displayed, the hard disk is being initialized. Please wait.
Starting the NEC Express5800/ft series clear installation
initializing a disk...
When the hard disk initialization is complete, the NEC Express5800/ft series automatically
restarts. After the NEC Express5800/ft series is restarted, the following message appears and
starts formatting the hard disk drive.
[Confirm]