NEC Express 5800 User Manual page 149

CD-ROM drive:\> cd \WINNT\DOTNET\EN
d-4. Run the following command from Comm
C D-ROM drive:\WINNT\ DOTN
d-5. The message of update completion will be displayed.
"[Update of the driver Completion]
Press any key and terminate."
IMPORT ANT:
If you hav e mistakenly manipulated
procedure s below. (N8803-031F (Fibre Channel controller) is not described here as there is
no possibi lity of performing its operations by mistake.)
(Probl ems) When you performed the operations for disconnected option boards by
mistake, the disconnected option boards are displayed with "!" on [Device
Manager]. (The following is the screen after [Device Manager] is started and
[Device by Connection] from the [View] menu is selected.)
(Remedies ) Start [Device Manager] and select [Device by C
menu. Then follow the procedures below.
a) Delete the disconnected option boards (device entr
Device entries to delete:
□ (!)NEC 8490XT Copper Gigab
□(!)Stratus AA-U51500 10/100 Enet Adapter
□(!)Stratus AA-U57000 Fiber Gigabit Adapter
a-1. Select the device and right-click, and then select [Uninstall...].
a-2. The [Confirm Dev
name and clic
Note: If you restart the system without deleting the disconnected option boards,
the following dialog box may appear at startup:
an option board which is not connected
screen above).
ice Removal] dialog box will appear. Confirm the device
k [OK].
and Prompt for updating the driver.
ET\EN > N8104103.BAT
onnection] from the [View]
it Adapter ←Performed d by mistake
←Performed a by mistake
←Performed c by mistake
Troubleshooting
, follow the
←Performed d by mistake
←Performed a by mistake
←Performed c by mistake
ies enclosed in bo xes on the
6-23