System Update - NEC Express 5800 User Manual

5-6 Procedures after Completion of Installation
● Windows Server 2003 (Service Pack not installed)
1. Click [Start], point to [Settings], click [Control Panel], and then
double-click [Network Connections].
2. Right-click the connection that you want, and then click [Properties].
3. Click the [Advanced] tab, and then click [Settings].
4. Click the [Service] tab, and then click [Add].
In the [Service Settings] dialog box, set the values as follows, and then
click [OK].
Description of service
Name or IP address of the computer
hosting this service on your network : Name or IP address of the computer
External Port number for this service : 161
Select
5. Close the [Network Connections] window.

System Update

To install NEC ESMPRO Agent, necipmi.sys needs to be installed in advance. For the installation of
necipmi.sys, use the NEC EXPRESSBUILDER CD-ROM shipped with the system to update the
system (see page 6-9).
If necipmi.sys is not installed yet, the message shown below appears and the setup of NEC ESMPRO
Agent is suspended.
"NEC ESMPRO Agent requires the following file.
Please update NEC Express5800 system before installing NEC ESMPRO Agent.
necipmi.sys"
: snmp
: UDP