NEC Express 5800 User Manual page 131
Hide thumbs
Also See for Express 5800:
- User manual (719 pages) ,
- Quick start manual (31 pages) ,
- Maintenance manual (20 pages)
Table of Contents
Advertisement
Select [Advanced] - [Monitoring Configuration] - [Boot Monitoring] and choose "Disabled".
See "Step 3: Disable Boot Monitoring Function" (4-11) for details.
4.
Insert the NEC EXPRESSBUILDER CD-ROM into the drive of the server.
5.
Then, reset (pressing Ctrl + Alt + Delete) or power off/on NEC Express5800/ft series to
reboot it.
The system will start up from the CD-ROM to start NEC EXPRESSBUILDER.
6.
From the [Tools] menu, select [Create Support Disk].
7.
From the [Create Support Disk] menu, select [Windows Server 2003 OEM-DISK for NEC
EXPRESSBUILDER].
8.
Follow the instructions on the screen to insert the floppy disk.
"Windows Server 2003 OEM-DISK for NEC EXPRESSBUILDER" will be created on the
floppy disk. Write-protect and place a label on the disk and keep it in a safe place.
IMPORTANT:
system without performing the system repair which uses the Recovery Console. From
[Advanced], select [Monitoring Configuration] and specify [Enabled] for [Boot
Monitoring]. See "Step 11: Enable Boot Monitoring Function" (4-46) for details.
Enable the configuration for boot monitoring function to deploy the
Troubleshooting
6-5
Advertisement
Table of Contents
Troubleshooting
