Display Message Examples; Explanation Of Displayed Text - Oki OKIFAX 5750 User Manual

5750GB.book Page 111 Tuesday, June 6, 2000 8:08 PM
Call Termination: This function provides immediate answering and the
ability to select the type of termination setting (FAX, TEL, MEM, PC or
FWD).
Direct Inward Dialling: A fax can be delivered directly to a specific
terminal when multiple machines are connected to a single line.
Multiple Subscriber Number (MSN) Restriction: This function is used
in combination with direct inward dialling to check if the number of the
incoming call matches an MSN in the machine's database. If not, the call
is rejected.
Sub-Address Service: Sub-addresses are most commonly used when
faxing point-to-multipoint (P-MP). In addition to the telephone number of
the remote location, the user must also know and input the sub-addresses
of the terminals that the fax is directed to.

Display Message Examples

The following example messages occur during call-in-progress.
Calling sequence
Fax transmission
Automatic reception
Remote diagnosis

Explanation of displayed text

†1 If Speed Dial ID is played here.
†2 Telephone number location (max. 40 characters)
†3 Displayed after calling sequence starts (PSTN/ISDN)
†4 Personal ID, TSI/TID for ISDN G4, phone no. of remote machine
for phone no.
Appendix D - ISDN G4 Board
ABC COMPANY †1
0334567890 †2
CALLING †3
ABC COMPANY †4
PAGE 001 †5
G4/64.0K †6
SENDING
AUTO REC. START
REMOTE DIAGNOSIS
English
111