Isdn Tsi/Csi; Other Related Functions - Oki OKIFAX 5750 User Manual

5750GB.book Page 110 Tuesday, June 6, 2000 8:08 PM
English

ISDN TSI/CSI

Some ISDN PBXs do not require the complete MSN to be programmed
into the fax machine. Therefore, if the fax machine is fitted with the ISDN
option, the TSI/CSI should be programmed as follows so that the correct
identification is printed on received faxes at the remote fax machine:
1. Make sure that no documents are loaded into the ADF.
2. Press the MENU/EXIT key.
Use the " key to select SETUP and press the ENTER key.
3.
Use the " key to select ID/PASSWORD PRG and press the
4.
ENTER key.
5. Enter + (One Touch key 39) followed by the couontry code (e.g. 44
for UK), then press the SPAVE key repeatedly until the ninth char-
acter is reached.
6. From the ninth character onward, enter the remaining digits of the
subscriber number as per the following table.
1 2 3 4 5
+ 4 4

Other related functions

The following are functions incorporated to enhance faxing operations.
Automatic Fallback: If the G4 signal transmitted from the machine is
rejected, the machine automatically retransmits the signal in G3 mode.
Similarly, if a G3 signal is received for an incoming call, the machine will
automatically switch to the G3 mode for the call.
Resolution Conversion: The resolution of a fax is converted according to
that of the document and the capacity of the remote machine.
Coding Conversion: The coding scheme of the communication is
converted according to that of the transmitting and receiving machines.
Call Origination: A number of ways are available for inputting and initi-
ating transmissions, including manual and automatic.
110
G3 TSI Position
6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
2 1 3 1 3 6 5 9 0 9