Oki OKIFAX 5750 User Manual page 21

5750GB.book Page 7 Tuesday, June 6, 2000 8:08 PM
20. Rear Cover - Remove this cover to expose the expansion slots for
optional memory, ISDN board and network interface card. Use a
Phillips screwdriver to remove screws A and B. DO NOT remove
any other screws. Once you have installed the peripheral equipment,
reattach the rear cover, securing it tightly with screws A and B.
21. AC Power Socket - Plug the AC power cable supplied with the unit
into this socket.
22. LED Print Head - This black bar is the transfer mechanism that
writes received/copied information to the image drum. The print
head should be cleaned each time the toner cartridge is changed.
23. Image Drum Unit - The image drum unit contains a photosensitive
drum (green in colour) which receives information from the LED
print head and transfers it to the printing paper. (Only image drums
specified for use in this machine and available from your author-
ised supplier should be installed.)
24. Toner Cartridge - This black cylinder, installed on the upper sec-
tion of the image drum unit, contains the black powder used as the
machine's ink for printing data. Install a new toner cartridge when
prompted by a message on the display panel. (Only toner cartridges
specified for use in this machine and available from your author-
ised supplier should be installed.)
Chapter 1 - Introduction
English
22
23
24
7