Table of Contents
Advertisement
CDM-Qx/QxL Multi-Channel Satellite Modem with DoubleTalk™ Carrier-in-Carrier®
Appendix B
3. Via the UTILITY: FAST submenu: Using the ◄ ► arrow keys, select Base, Slot1, Slot2,
Slot3, or Slot3, then press
FAST – Select the module:
Base Slot1 Slot2 Slot3 Slot4
Base refers to the base unit, where the redundancy and CnC options may be upgraded; the Slot#
refers to the populated module slots in the rear panel of the chassis – either a modulator or
demodulator module may be installed (the combination and quantity of modules will vary per
specific user setup).
4. If UTILITY: FAST
version on the top line, and the Base unit's Motherboard Serial Number on the bottom line:
FAST: Config
Board S/N: 123456789
a. Record the Base Unit Motherboard Serial Number:
______________________________
5. If UTILITY: FAST
FAST - Slot#1: Mod
FAST - Slot#2: Demod
As per the above examples, the selected menu screen indicates whether the installed module
is a Modulator, or Demodulator. Select Mod (Demod) or Turbo using the
then press
ENTER
a. If UTILITY: FAST
Number is identified on the bottom line:
FAST: Config
Board S/N: 223456789
FAST: Config
Board S/N: 323456789
Record the Module's Board Serial Number:
______________________________
b. If UTILITY: FAST
module for Turbo Product Codec (TPC) daughterboard is identified on the bottom line:
FAST: Config
Board S/N: 423456789
Record the Module's TPC Daughterboard Serial Number:
______________________________
.
ENTER
Base is selected: The menu screen displays the chassis hardware
View
(HW 1.02)
(Base)
Slot# (where # designates the chosen slot number) is selected:
Turbo
(▲ ▼,ENT)
Turbo
(▲ ▼,ENT)
.
Mod (Demod) is selected, the module's Board Serial
Slot#
View
View
Slot#
View
B–2
(Mod#1)
(Dem#2)
Turbo is selected, the Board Serial Number for the
(TPC#1)
Revision 7
MN/CDMQX.IOM
◄ ►
arrow keys,
Advertisement
Table of Contents
