Comtech EF Data CDM-Qx Installation And Operation Manual page 130

CDM-Qx/QxL Multi-Channel Satellite Modem with DoubleTalk™ Carrier-in-Carrier®
Front Panel Operation
UTILITY: FAST
FAST Configuration:
Edit Code
Select Edit Code or Demo Mode using the
UTILITY: FAST
Code, Demo Mode
Operation here is identical to selections made via the
menu screen. Refer to
Base Config Demo Mode
UTILITY: FAST
View Options: 01
TPC Codec
Use the
Installed for Mod/Demod operation. Press
UTILITY: FAST
FAST: Config
Board S/N: 423456789
As with the menu screen for
menu screen identifies the serial number for the Turbo Product Codec board for the module
residing in this slot position (in the above example, Slot#1 has been selected, and the TPC board
is therefore identified as TPC#1).
Select Config or View using the
UTILITY: FAST
FAST Configuration:
Edit Code
Select Edit Code or Demo Mode using the
UTILITY: FAST
Operation here is identical to selections made via the
submenu screens. Refer to
FAST Base Config Demo Mode
UTILITY: FAST
View Options: 03
5M Turbo
Use the
Installed for Turbo Product Codec. Press
Slot#
Demo Mode
Slot#
UTILITY: FAST Base Config Edit Code
Slot#
- Installed
arrow keys to display which FAST options are either Installed or Not
▲ ▼
Slot#
View
UTILITY: FAST Base
◄ ►
Slot#
Demo Mode
Slot#
UTILITY: FAST Base Config Edit Code
Slot#
- Installed
arrow keys to display which FAST options are either Installed or Not
▲ ▼
Mod, Demod
◄ ►
arrow keys, then press
Mod, Demod
for further details.
Mod, Demod
(▲ ▼,ENT)
when done.
ENTER
Turbo
(TPC#1)
and
UTILITY: FAST Mod, Demod
arrow keys, then press
Turbo Config
◄ ► arrow keys, then press
Turbo Config
for further details.
Turbo View
(▲ ▼,ENT)
when done.
ENTER
5–64
MN/CDMQX.IOM
Config
.
ENTER
Config Edit
UTILITY: FAST Base Config
or
UTILITY: FAST
View
.
ENTER
.
ENTER
Edit Code, Demo Mode
UTILITY: FAST Base Config
or
Revision 7
, this
UTILITY: