Dell PowerConnect W-Airwave User Manual page 93

Table 53 Groups > Security Page Fields and Default Values (Continued)
Setting
Authentication Profile
Name
Authentication Profile
Index
MAC Address Authentication Section
MAC Address
Authentication
MAC Address Format
Authorization Lifetime
Primary RADIUS Server
Reattempt Period
3. Click Save to retain these Security configurations for the group, click Save and Apply to retain and push these
configurations, or click Revert to return to the last saved security settings for this group.
4. Continue with additional security-related procedures in this document for additional TACACS+, RADIUS,
and SSID settings for device groups, as required.
Dell PowerConnect W AirWave 7.1 | User Guide
Default Description
Accounting For Proxim devices only, this field sets the name of the accounting profile to be
supported in this device group.
3 For Proxim devices only, this field sets the name of the accounting profile index to
be supported in this device group.
No If enabled, only MAC addresses known to the RADIUS server are permitted to
associate to APs in the Group.
Single Dash Allows selection of the format for MAC addresses used in RADIUS authentication
and accounting requests:
Dash Delimited: xx-xx-xx-xx-xx-xx (default)

Colon Delimited: xx:xx:xx:xx:xx:xx

Single-Dash:

No Delimiter:

This option is supported only for Proxim AP-600, AP-700, AP-2000, AP-4000, Avaya
AP3/4/5/6/7/8, HP ProCurve 520WL, ProCurve 420 v2.1.0 and higher.
1800 Sets the amount of time a user can be connected before reauthorization is required.
The supported range is from 900 to 43,200 seconds.
0 Specifies the time (in minutes) that the AP awaits responses from the primary
RADIUS server before communicating with the secondary RADIUS server, and so
forth
xxxxxx-xxxxxx
xxxxxxxxxxxx
Configuring and Using Device Groups in AWMS | 93