Dell PowerConnect W-Airwave User Manual page 224

Table 117 Device IDS Events Authentication Trigger Types and Condition Settings
IDS Trigger Options
Device IDS Events
b. Delete conditions for any trigger as desired by clicking the trash can icon to the right of the condition to
be removed.
c. Click Save. The trigger appears on your next viewing of the System > Triggers page with all other active
triggers.
d. You can edit or delete any trigger as desired from the System > Triggers page.


e. Repeat this procedure for as many triggers and conditions as desired. Refer to the start of
Triggers" on page 214
224 | Performing Daily Administration in AWMS
Description
This trigger type is based on the number of IDS events has exceeded the threshold specified as
Count in the Condition within the period of time specified in seconds in Duration. Alerts can also be
generated for traps based on name, category or severity. Click Add New Trigger Condition to specify
the count characteristics that trigger an IDS alert. The Option, Condition, and Value fields allow you
to define the numeric count of device IDS thresholds.
Figure 152 IDS Events Trigger Condition Settings
To edit an existing trigger, click the pencil icon next to the respective trigger and edit settings in the
Trigger Detail page described in
To delete a trigger, check the box next to the trigger to remove, and click Delete.
to create a new trigger.
Table 112.
Dell PowerConnect W AirWave 7.1 | User Guide
"Creating New