Dell PowerConnect W-Airwave User Manual page 132

Figure 80 Device Setup > Discover > Executing a Scan Illustration
2. Check the box next to the scan(s) that you would like to execute.
3. Click Scan to execute the selected scans, and the scan immediately begins. The Stop column reads In
Progress.
4. For future scans, click Show Scheduling Options and enter the desired date and time to schedule a future
scan.
5. After several minutes have passed, click the Refresh button in your browser to refresh the page and view the
results of the scan you have just run. When the Start and Stop columns display date and time information,
and no longer display In progress, the scan is available to display the results.
6. Click the Pencil icon for the scan you have just run to display the results.
and related information.
Table 79 Device Setup > Discover > Discovery Execution Fields
Column
Network
Credentials
Total APs Found
New APs Found
Total Rogues Found
New Rogues Found
Start
Stop
Scheduled
7. Navigate to the APs/Devices > New page to see a full list of the newly discovered devices that the scan
detected.
132 | Discovering, Adding, and Managing Devices
Description
Displays the network to be scanned.
Displays the credentials used in the scan.
Displays the total number of APs detected during the scan that AWMS can configure and monitor. Total
includes both APs that are currently being managed by AWMS as well as newly discovered APs that
are not yet being managed.
Displays the number of newly discovered APs that are not yet being managed by AWMS but are
available.
Displays the total number of APs detected during the scan that AWMS could not configure or monitor.
Total includes both APs that have been discovered in earlier scans as well as newly discovered APs
from the most recent scan.
Displays the number of rogue APs discovered on the most recent scan.
Displays the date and time the most recent scan was started.
Displays the date and time the scan most recently completed.
Displays the scheduled date and time for scans that are scheduled to be run.
Figure 81 illustrates this page.
Table 79 describes the scan results
Dell PowerConnect W AirWave 7.1 | User Guide