Dell PowerConnect W-Airwave User Manual page 61

1. Navigate to the Device Setup > Upload Files page. This page displays any existing Web Auth bundles that
are currently configured in AWMS, and allows you to add or delete Web Auth bundles.
2. Scroll to the bottom of the page. Click Add New Web Auth Bundle to create a new Web Auth bundle, or click
the pencil icon next to an existing bundle to edit. You may also delete Web Auth bundles by selecting that
bundle with the checkbox, and clicking Delete.
When you add or edit a Web Auth bundle, the Web Auth Bundle page appears, as illustrated in
Figure 28 Add Web Auth Bundle Page Illustration
3. Enter a descriptive label in the description field. This is the label by which you identify and track Web Auth
bundles on the Device Setup > Upload Files page once they are present in AWMS.
4. Enter the path and filename of the Web Auth configuration file in the Web Auth Bundle field. Click Browse
to locate the file with the browsing method, as required.
5. Click Add to complete the Web Auth bundle creation, or click Save if replacing a previous Web Auth
configuration file, or click Cancel to abort the Web Auth integration.
6. The Device Setup > Upload files page displays your changes.
For additional information and a case study that illustrates the use of Web Auth bundles with Cisco Airespace/
WLC controllers, refer to the following document on Cisco.com:
Wireless LAN controller Web Authentication Configuration Example, Document ID: 69340

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008067489f.shtml
Dell PowerConnect W AirWave 7.1 | User Guide
Figure 28.
Configuring AWMS | 61