Dell PowerConnect W-Airwave User Manual page 166

Figure 110 Add Virtual Interfaces Page for Wired Devices
.
New physical and virtual interfaces are discovered using SNMP polling as described in "SNMP/HTTP Scanning"
on page 128. To refresh and reload all current interface information from a device, click Import Interfaces on the
bottom of the page as shown in Figure 111.
Figure 111 Import Interfaces for Refresh and Reload (lower portion of page)
.
You can view details for each interface on a wired device, from its individual interface page, as well. For a detailed
explanation of the data available on each individual interface monitoring page, see "Understanding the APs/
Devices > Interfaces Page" on page 154.
You can configure interface settings individually or in groups. To configure individual interface settings, click the
pencil icon to the left of the interface name appearing from the AP/Devices > Interfaces page, as shown in Figure
112.
166 | Discovering, Adding, and Managing Devices Dell PowerConnect W AirWave 7.1 | User Guide