Dell PowerConnect W-Airwave User Manual page 207

Table 105 RAPIDS > Rules Page
Field
Reorder Drag and Drop Icon
To create a new rule, select the Add button next to New RAPIDS Classification Rule to launch the RAPIDS
Classification Rule page (see
Figure 136 Classification Rule Page
Fill in the settings described in
Table 106,
RAPIDS Classification Rule dialog box (see
The new rule automatically appears in the RAPIDS > Rules page.
Table 106 Wireless Properties Drop Down Menu
Option
Detected on WLAN
Discovering AP Count
Encryption
Dell PowerConnect W AirWave 7.1 | User Guide
Description
Changes the sequence of rules in relation to each other. Click, then drag and drop, the icon for
any rule to move it up or down in relation to other rules. A revised sequence of rules must be
saved before rogues are classified in the revised sequence.
NOTE: The sequence of rules is very important to proper rogue classification. A device gets
classified by the first rule to which it complies, even if it conforms to additional rules later in the
sequence.
Figure
Table 105
Table 107, and Table 108
Description
Classifies based on how the rogue is detected on the wireless LAN.
Classifies based on the number of managed devices that can hear the rogue. Enter a numeric
value and select At Least or At Most.
Classifies based on the rogue matching a specified encryption method.
136).
then select an option from the drop down menu.
define the drop down menu options that are at the bottom left of the
Figure 136). Once all rule settings are defined, click the Add button.
Using RAPIDS and Rogue Classification | 207