Dell PowerConnect W-Airwave User Manual page 178

Table 93 Groups > Templates Fields and Default Values (Continued)
Setting
Status
Fetch Date
Version Restriction
3. To create a new template and add it to the AWMS template inventory, navigate to the Groups > List page,
and select the group to which you will apply the template. Click the group name and the Details page appears.
Click Templates, then click Add.
4. Complete the configurations illustrated in
178 | Creating and Using Templates
Description
Displays the status of the template.
Sets the date that the template was originally fetched from a device.
Designates that the template only applies to APs running the version of firmware specified. If the
restriction is None, then the template applies to all the devices of the specified type in the group. If there
are two templates that might apply to a device the template with the most restrictions takes precedence. If
there is a template that matches a devices firmware it will be used instead of a template that does not
have a version restriction.
Figure 124, and the settings described in
Dell PowerConnect W AirWave 7.1 | User Guide
Table 94.