Back Frame And Printer Stabilizer - Xerox C2424 - WorkCentre Color Solid Ink Service Manual

Back Frame and Printer Stabilizer

( Stabilizer PL 3.14) (Backframe PL 5.24)
Caution
If replacing a back frame, perform the following procedure on a flat surface.
1.
Remove the DADF and scanner assemblies (page 8-4).
2.
Remove the output tray (page 8-8).
3.
Remove the left and right side covers (page 8-11).
4.
Remove the scanner power supply and MEP control board (page 8-42).
5.
Remove the Electronics Module(page 8-61).
6.
Remove 2 screws securing the stabilizers to the system and remove the stabilizer.
.
7.
Remove Ink loader (page 8-13).
8.
Remove 4 screws from the top.
9.
Remove 7 screws from the rear of the back frame.
Service Parts Disassembly
Stabilizer
s2424-245
8-63