Xerox C2424 - WorkCentre Color Solid Ink Service Manual page 187

Paper Lead Edge Times (Continued)
Paper is picked and moved through either simplex or duplex paper path to determine leading
edge arrival time at each paper path sensor. R values have alternate definitions or are unused
depending on the pick tray and if simplex or duplex path was selected.
R# Definition
7 Exit Interval (us)
Simplex Path
8 Exited Interval (us)
Paper Trail Edge Times
Paper is picked and moved through either the simplex or duplex paper path to determine the
paper trailing edge arrival time at each paper path sensor. R values have alternate definitions or
are unused depending on the pick tray and if simplex or duplex path was selected.
R# Definition
Common
0 Tray
1 Paper Size
Tray 4 Pick
2 Tray 4 Pick Trailing
Edge Interval (us)
Tray 3 Pick
3 Tray 3 Pick Trailing
Edge Interval (us)
Tray 2 Pick
2 Unused
General Troubleshooting
Typical
Value Actions
MFG Reports the interval from the time the engine
Only software is commanded to start the transfix
process until the Exit sensor activates (part
way through the paper transfix motion).
MFG Reports the interval from the time the engine
Only software is commanded to start the exit
process until the Exit sensor deactivates.
Typical
Value Actions
MFG Reports the tray from which the test paper was
Only picked.
MFG Reports the size of the picked paper.
Only
MFG Reports the interval from the time the engine
Only software is commanded to start the tray 4 pick
process until the Tray 4 Pick sensor
deactivates.
MFG Reports the interval from the time the engine
Only software is commanded to start the tray 3 pick
process until the Tray 3 pick sensor
deactivates.
MFG
Only
4-29