Xerox C2424 - WorkCentre Color Solid Ink Service Manual page 191

Duplex Paper Lead Edge Times (Continued)
Paper is picked and moved through either simplex or duplex paper path to determine leading
edge arrival time at each paper path sensor. R values have alternate definitions or are unused
depending on the pick tray and if simplex or duplex path was selected.
R# Definition
12 Duplex Exit Interval
(us)
13 Duplex Exited
Interval (us)
Duplex Paper Trail Edge Times
Paper is picked and moved through either the simplex or duplex paper path to determine the
paper trailing edge arrival time at each paper path sensor. R values have alternate definitions or
are unused depending on the pick tray and if simplex or duplex path was selected.
R# Definition
7 Exit Trailing Edge
Interval (us)
8 Duplex Deskew
Trailing Edge
Interval (us)
9 Duplex Preheat
Trailing Edge
Interval (us)
10 Duplex Strip Trailing
Edge Interval (us)
11 Duplex Exit Trailing
Edge Interval (us)
General Troubleshooting
Typical
Value Actions
MFG Reports the interval from the time the engine
Only software is commanded to start the transfix
process until the exit sensor activates (part
way through the paper transfix motion).
MFG Reports the interval from the time the engine
Only software is commanded to start the exit
process until the exit sensor deactivates.
Typical
Value Actions
MFG Reports the interval from the time the engine
software is commanded to start the duple pick
Only
process until the exit sensor deactivates.
MFG Reports the interval from the time the engine
software is commanded to start the transfix
Only
process until the deskew sensor deactivates.
(part way through the paper transfix motion).
MFG Reports the interval from the time the engine
software is commanded to start the transfix
Only
process until the preheat sensor deactivates.
(part way through the paper transfix motion).
MFG Reports the interval from the time the engine
software is commanded to start the exit
Only
process until the strip sensor deactivates. (part
way through the paper exit motion).
MFG Reports the interval from the time the engine
software is commanded to start the duplex pick
Only
process until the exit sensor deactivates.
4-33