Xerox C2424 - WorkCentre Color Solid Ink Service Manual page 190

Duplex Paper Drive Power
Test picks paper from selected tray (test currently supports picking from Tray 2 only) and moves it
through either the simplex or duplex paper path to determine paper path power requirements.
R# Definition
0 Tray
1 Paper Size
2 Unused
3 Unused
4 Tray 2 Pick Average
Power (watts)
Duplex Paper Lead Edge Times
Paper is picked and moved through either simplex or duplex paper path to determine leading
edge arrival time at each paper path sensor. R values have alternate definitions or are unused
depending on the pick tray and if simplex or duplex path was selected.
R# Definition
8 Duplex Turnaround
Interval (us)
9 Duplex Pick Interval
(us)
10 Duplex Stage
Interval (us)
11 Duplex Transfix
Interval (us)
4-32
Typical
Value Actions
MFG Reports the tray from which the test paper was
Only picked.
MFG Reports the size of the picked paper.
Only
MFG
Only
MFG
Only
MFG Reports average of the power over the pick
Only interval (begin pick to deskew sensor).
Typical
Value Actions
MFG Reports the interval from the time the engine
Only software is commanded to start the duplex exit
process until the strip sensor deactivates.
MFG Reports the interval from the time the engine
Only software is commanded to start the duplex pick
process until the deskew sensor activates.
MFG Reports the interval from the time the engine
Only software is commanded to start the stage
process until the preheat sensor activates.
(part way through the stage paper motion).
MFG Reports the interval from the time the engine
Only software is commanded to start the transfix
process until the strip sensor activates. (part
way through the paper transfix motion).
WorkCentre C2424 Service Manual