Intel SL7PG - Xeon 3.4 GHz/800MHz/1MB Cache CPU Processor Specification page 33

When this erratum occurs, systems may encounter unexpected behavior. Intel has not observed this
Implication:
erratum with any commercially available software.
Workaround: Software should prevent LDT selector accesses from crossing the 0xffff limit.
Status: For the steppings affected, see the Summary Table of Changes.
S53 Upper reserved bits are incorrectly checked while loading PDPTR's on a
processor supporting Intel
®
(Intel EM64T)
In IA-32 and IA-32e mode of the Intel processor, upper reserved bits are incorrectly checked while
Problem:
loading PDPTR's, allowing software to set the reserved bits.
Operating system or driver software is able to set the reserved bits which may result in an
Implication:
unexpected system behavior.
None identified.
Workaround:
Status: For the steppings affected, see the Summary Table of Changes.
S54 Loading a stack segment with a selector that references a non-canonical
address can lead to a #SS fault on a processor supporting Intel
Memory 64 Technology (Intel
Problem: When a processor supporting Intel EM64T is in IA-32e mode, loading a stack segment with a
selector which references a non-canonical address will result in a #SS fault instead of a #GP fault.
When this erratum occurs, Intel EM64T enabled systems may encounter unexpected behavior.
Implication:
None at this time.
Workaround:
Status: For the steppings affected, see the Summary Table of Changes.
S55 CPUID instruction incorrectly reports CMPXCH16B as supported
A read of the CMPXCHG16B feature flag improperly indicates that the CMPXCHG16B instruction is
Problem:
supported.
When a processor supporting Intel EM64T attempts to execute a CMPXCH16B instruction, the
Implication:
system may hang rather than #UD fault.
It is possible for the BIOS to contain a workaround for this erratum, such that the CMPXCH16B
Workaround:
feature flag indicates that the instruction is not supported, and the execution of the CMPXCHG16B
instruction results in a #UD fault.
Status: For the steppings affected, see the Summary Table of Changes.
S56 FXRSTOR may not restore non-canonical effective addresses on
processors with Intel
enabled
Problem: If an x87 data instruction has been executed with a non-canonical effective address, FXSAVE may
store that non-canonical FP Data Pointer (FDP) value into the save image. An FXRSTOR
instruction executed with 64-bit operand size may signal a General Protection Fault (#GP) if the
FDP or FP Instruction Pointer (FIP) is in non-canonical form.
When this erratum occurs, Intel EM64T enabled systems may encounter an unintended #GP fault.
Implication:
Software should avoid using non-canonical effective addressing in EM64T enabled processors.
Workaround:
BIOS can contain a workaround for this erratum removing the unintended #GP fault on
FXRSTOR.
Status: For the steppings affected, see the Summary Table of Changes.
® ®
64-bit Intel Xeon Processor with 800 MHz System Bus
(1 MB and 2 MB L2 Cache Versions) Specification Update
®
Extended Memory 64 Technology
®
EM64T)
®
Extended Memory 64 Technology (Intel
Errata
®
Extended
®
EM64T)
33