Using The Vpn Wizard For Client And Gateway Configurations; Creating Gateway To Gateway Vpn Tunnels With The Wizard - NETGEAR ProSafe FVS336Gv2 Reference Manual

ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336Gv2 Reference Manual
Using the VPN Wizard for Client and Gateway
Configurations
You use the VPN Wizard to configure multiple gateway or client VPN tunnel policies.
The following section provides wizard and NETGEARVPN Client configuration procedures
for the following scenarios:
• Using the wizard to configure a VPN tunnel between 2 VPN gateways
• Using the wizard to configure a VPN tunnel between a VPN gateway and a VPN client
Configuring a VPN tunnel connection requires that all settings and parameters on both sides
of the VPN tunnel match or mirror each other precisely, which can be a daunting task. The
VPN Wizard efficiently guides you through the setup procedure with a series of questions that
will determine the IPsec keys and VPN policies it sets up. The VPN Wizard will also set the
parameters for the network connection: Security Association, traffic selectors, authentication
algorithm, and encryption. The parameters used by the VPN wizard are based on the
recommendations of the VPN Consortium (VPNC), an organization that promotes
multi-vendor VPN interoperability.

Creating Gateway to Gateway VPN Tunnels with the Wizard

Figure 5-5 Gateway-to-Gateway Example
To set up a gateway VPN tunnel using the VPN Wizard:
1. Select VPN > IPsec VPN from the menu.
72 | Chapter 5: Virtual Private Networking Using IPsec