Programming Initial Set Up Of A Special Sender - Ricoh 8025e Operating Instructions Manual

Facsimile Features

Programming Initial Set Up of a Special Sender

This section describes how to program Initial Set Up of a Special Sender.
Program the "Initial Set Up" of a Special Sender. You can also specify the Bypass
Tray Paper Size.
A
Press [Facsimile Features].
B
Press [Administrator Tools].
C
Press [Program Special Sender].
D
Press [Initial Set Up].
4
E
Select the function you want to program.
In this feature, "Authorized RX" has the same settings as "Reception Set-
tings". See "Reception Settings".
F
Press [Exit].
G
Press the {User Tools/Counter} key.
Reference
p.97 "Reception Settings"
Programming Authorized RX and Special RX Function
A
Select [Authorized RX] or [Special RX Function].
B
Select [On] or [Off], and then press [OK].
The illustration shows the "Authorized RX" display as an example.
142