Registering Folders; Using Smb To Connect - Ricoh 8025e Operating Instructions Manual

Registering Folders

This section describes the procedure for registering, changing, and deleting folders.
By registering a shared folder, you can send scan files to it directly.
There are three types of protocol you can use:
• SMB
For sending files to shared Windows folders.
• FTP
Use when sending files to an FTP server.
• NCP
Use when sending files to an NetWare server.
Note
❒ For details about protocols, server names, and folder levels, consult your net-
work administrator.
❒ You can prevent unauthorized users from accessing folders from the ma-
chine. See "Registering a Protection Code".
❒ You can only select either SMB, FTP, or NCP. If you change protocol after fin-
ishing your settings, all previous entries are cleared.

Using SMB to Connect

This section describes the procedure for registering, changing, and deleting SMB
folders.
Note
❒ To register a folder in an FTP server, see "Using FTP to Connect".
❒ To register a folder in an NetWare server, see "Using NCP to Connect".
Reference
p.223 "Using FTP to Connect"
p.229 "Using NCP to Connect"
Registering an SMB Folder
This section describes how to register a SMB folder.
A
Press [System Settings].
B
Press [Administrator Tools].
Registering Folders
217
7