Ricoh 8025e Operating Instructions Manual page 58

System Settings
❖ Effective Protocol
Select the protocol to use in the network.
The default setting for TCP/IP is Effective.
The default setting for NetWare is Effective.
The default setting for SMB is Effective.
The default setting for AppleTalk is Effective.
❖ NCP Delivery Protocol
2
Select the protocol for NCP delivery.
The default setting is TCP / IP Priority.
❖ NW Frame Type
Select the frame type when you use NetWare.
The default setting is Auto Select.
❖ SMB Computer Name
Specify the SMB computer name.
Enter the computer name using up to 15 characters.
"*+,/:;<>=?[\]|. and spaces cannot be entered.
Do not set a computer name starting with RNP and rnp.
Use uppercase letters for alphabets.
❖ SMB Work Group
Specify the SMB work group.
Enter the computer name using up to 15 characters.
"*+,/:;<>=?[\]|. and spaces cannot be entered.
Use uppercase letters for alphabet.
❖ Ethernet Speed
Set the access speed for networks.
The default setting is Auto Select.
Select a speed that matches your network environment. [Auto Select] should
usually be selected.
❖ LAN Type
When you have installed the IEEE 802.11b interface unit, select the method of
connection.
The default setting is Ethernet.
[LAN Type] is displayed when wireless LAN board is installed. If Ethernet and
IEEE 802.11b (wireless LAN) are both connected, the selected interface has
priority.
50