Ricoh 8025e Operating Instructions Manual page 110

Facsimile Features
❖ SIP Settings
Set the SIP server's IP address or host name, and SIP user name.
If you select [On] using the User Parameters, you can use the SIP server. See
"Parameter Settings" ( switch 34, bit 1).
You can use alphanumeric symbols (lower and upper cases) and symbols (";",
"?", ":", "&", "=", "+", "$", ",", "-", "_", ".", "!", "~", "*", "#", "'", "(", ")", "%", "/", and
"@") for registration of the SIP User Name in SIP Settings. Make sure you enter
these characters correctly.
Use numbers and periods (".") to enter the correct IP addresses for the gate-
keeper, SIP server, and gateway. To obtain the correct IP addresses, consult
the administrator.
A Press [Facsimile Features].
B Press [IP-Fax Settings].
C
Press [SIP Settings].
4
D Press [Change] for each property.
A proxy server relays call requests and responses.
A redirect server processes request destination inquiries.
A register server registers location information of user agents (which cor-
respond to telephones or facsimiles on public telephone lines) on an IP net-
work.
E Enter the IP address or host name, and SIP user name, and then press [OK].
F
Press [OK].
Press the {User Tools/Counter} key.
G
102